Pulse-Counter Logic Pcggio - ABB Relion 650 series ANSI Manual

1MRK 511 281-UUS A
Table 133: MVGGIO Logical node data
DO name DO type
Mod a_dINC
AnIn a_dMV
7.8.1.11
650 series ANSI
Communication protocol manual
DA name FC
Oper.ctlVal CO
Oper.origin.orCat CO
Oper.origin.orIdent CO
Oper.ctlNum CO
Oper.T CO
Oper.Test CO
Oper.Check CO
stVal ST
q ST
t ST
rangeC.hhLim.f CF
rangeC.hLim.f CF
rangeC.lLim.f CF
rangeC.llLim.f CF
rangeC.max.f CF
rangeC.min.f CF
mag.f MX
subMag.f SV
range MX
q MX
t MX
subEna SV
db CF
zeroDb CF

Pulse-counter logic PCGGIO

LN type LN prefix LN class Function block name
PCGGIO (revision 1) PC
T Signal
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- MV hhLim
- MV hLim
- MV lLim
- MV llLim
- MV max
- MV min
- VALUE
- -
- RANGE
- VALUE
- VALUE
- -
- MV db
- MV zeroDb
GGIO PCGGIO
Logical node data model
Mon/C Description
md
Cmd Mode parameter
Cmd Mode parameter
Cmd Mode parameter
Cmd Mode parameter
Cmd Mode parameter
Cmd Mode parameter
Cmd Mode parameter
Mon Mode status parameter for 61850
Mon Mode status parameter for 61850
Mon Mode status parameter for 61850
- High High limit multiplied with the base
prefix (multiplication factor)
- High limit multiplied with the base prefix
(multiplication factor)
- Low limit multiplied with the base prefix
(multiplication factor)
- Low Low limit multiplied with the base
prefix (multiplication factor)
- Maximum value multiplied with the
base prefix (multiplication factor)
- Minimum value multiplied with the base
prefix (multiplication factor)
Mon Magnitude of deadband value
- Substituted value
Mon Range
Mon Magnitude of deadband value
Mon Magnitude of deadband value
- Enable substitution
- Cycl: Report interval (s), Db: In % of
range, Int Db: In %s
- Zero point clamping in 0.001% of range
Section 7
183