Internal Control Information - 900 Series - Norcold 9182 Service Manual & Parts List

Corrective Action
Replace power board.
Internal Control Information - 900 and 9100 Series
Internal Control Information provides additional information to aid in trouble shooting. To access the Internal Control
Information mode (900 and 9100 series), press the TEMP SET and the MODE buttons simultaneously for 10 seconds. While
in the Internal Control Information mode, the refrigerator continues to operate in the mode selected prior to entering the
information mode. Different control information displays can be selected with the MODE button. The 900 series control
illuminates images on the display panel. The 9100 series internal information is communicated through the 9 temperature
LED's. The Internal Control Information mode can be exited by pressing the MODE and TEMP SET buttons simultaneously
for 2 seconds, after which the control reverts to the normal display mode.
Screen No. 1 - Input Images
Figure 5
A. Identifies the information screen.
B. When operating in the LP Gas mode, this bar signifies burner flame is sensed by the power board.
C. All modes of operation. This bar signifies that the door switch is in the closed (normal) position, that the fresh food
compartment door is closed, and that the interior light is OFF.
Section 18 - Internal Control Failure
900 Series Informational Screens
A
B
C
19