Norcold 9182 Service Manual & Parts List page 13

All LED's Flashing-3 Way Models Only
Flashing Temperature Setting LED-All Models
All LED's Flashing-All Models
All LED's Flashing-All Models
All LED's Flashing-All Models
All LED's Flashing-3-Way Models Only
DC heater failed open. DC voltage is being supplied to the heater but the heater is not
Back-Up Operating System. If the thermistor becomes inoperable, the power board will
revert to the Back-Up Operating System. When the refrigerator enters this mode the
thermistor is ignored and the refrigerator will interpret the thermostat setting as a duty
AC heater failed open. AC voltage supplied to heater; AC heater not drawing current.
AC heater failed for current out-of-tolerance.
DC heater failed for current out-of-tolerance.
12
(LED's will flash, pause, flash, pause, etc.)
drawing current (no cooling).
(LED will flash, pause, flash, pause, etc.)
cycle command.
(LED's will flash, pause, flash, pause, etc.)
(LED's will flash, pause, flash, pause, etc.)
Flame sense circuit failure.
(LED's will flash, pause, flash, pause, etc.)
(LED's will flash, pause, flash, pause, etc.)