BBQ SH-9902-B Owner's Manual page 11

compressed air and wipe with a cloth.

Clean any clogged ports with a pipe cleaner or stiff wire (such as
an opened paper clip).
 Ensure that no water is retained in the burner, prior to re-
assembly.
 Inspect burner for any damage (cracks or holes). If damage is
found, replace with a new burner. Reinstall the burner, check to
ensure that the Gas valve orifices are correctly positioned and
secured inside the burner inlet (venturi).
SERVICING
Your gas barbecue should be serviced annually by a competent registered
person.
 Storage-
 Turn off gas container valve, and remove regulator from
container.
 Store gas container outside, on the ground level surface,
upright, away from sunlight and any drains or gully, with valves
closed and valve caps in place.

Clean the grill as in 3 above
 When stored outdoors, the grill must stand on dry ground.

Ensure a small amount of fat or cooking oil is on the cooking
plates to prevent rust.

While this appliance is not in use, it should be covered with the
cover, to protect it from weather and other adverse conditions. In
high humidity and/or ocean beach areas, make sure to keep the
unit clean and polished. Use stainless steel cleaners, polishes or
stainless steel oil protectants.
Warning
STORE CYLINDER IN A WELL VENTILATED AREA
OUT OF REACH OF CHILDREN.
When the gas cylinder is disconnected, replace the plug or cap on the valve
outlet.
For extended storage it is suggested that the primary airports of the burners
be covered against the penetration of insects or vermin.
Also a vinyl or canvas cover may be placed over the appliance.
Do not allow food or liquid spills to accumulate in and on your BBQ
11