Skoda CITIGO Owner's Manual page 66

Note
The air inlet in front of the windscreen must be free of e.g. ice, snow or
■
leaves to ensure that the heating and cooling system operates properly.
After switching on the cooling Condensation from the evaporator of the air
■
conditioning may drip down and form a puddle below the vehicle. This is not a
leak!
If the coolant temperature is too high, the cooling system is switched off to
■
ensure that the engine cools down.
Heating and manual air conditioning
Fig. 88 Heating Controls
Fig. 89 Controls of the air conditioning

Read and observe on page 63 first.
Individual functions can be set or switched on by turning the control dial and
pressing the appropriate button
switched on, the indicator light in the button lights up.
64
Using the system
» Fig. 88 and » Fig. 89. When the function is
Setting temperature
A
Reduce the temperature /
▶

Setting the fan speed (level 0: blower off, level 4: highest speed)
B
Set the direction of the air outlet
C
 Air flow to the windows
 Air flow to the upper body
 Air flow to the footwell
 Air flow to the windows and the footwell
Recirculated air mode
D
▶  Switch on
▶  Switch off
Switching the cooling system on/off

Information on the cooling system
After pressing the button  the indicator light on the button lights up, even if
not all the conditions for the cooling system have been met. The cooling sys-
tem starts to work as soon as the following conditions have been met
» page 63.
Note
In order to ensure adequate warmth and comfort, the operation of the air con-
ditioning may lead to an increase in the engine idle speed.
Increase the temperature

» page 66