Skoda CITIGO Owner's Manual page 140

Replacing the bulb for daytime running lights and parking lights-
Variant 1

Read and observe and
›
Turn the housing containing the bulb
stop in the direction of the arrow
›
Remove the housing containing the bulb in the direction of arrow
›
Change the bulb.
›
Insert the housing containing the light bulb in the lamp housing in the oppo-
site direction to arrow .
2
›
Screw the housing in the opposite direction to arrow
place.
Change bulb for low beam and high beam - Variant 2

Read and observe and
›
Remove the protective caps
D
›
Turn the holder with the bulb in the direction of arrow
›
Remove the holder with the bulb in the direction of arrow
138
Do-it-yourself
Fig. 175
Replacing the bulb for daytime
running lights and parking lights
on page 136 first.
» Fig. 173 on page 137 as far as the
C
» Fig. 175 .
1
until it clicks into
1
Fig. 176
Removing bulbs for high and
main beam
on page 136 first.
and » Fig. 173 on page 137.
E
» Fig. 176.
1
.
2
›
Change the bulb and insert the connector with the new bulb into the head-
light in the opposite direction to the arrow
›
Turn the connector with the new bulb in the opposite direction to the arrow
until it stops.
1
›
Use the protective caps
Changing the bulb for the front turn signal light
.
2
Fig. 177 Replacing the bulb for front turn signal light: Version 1 / Version
2

Read and observe
›
Turn the socket with the bulb to the stop in the direction of the arrow
» Fig. 177.
›
Remove the housing containing the bulb in the direction of arrow
›
Unscrew the defective bulb in its housing in an anti-clockwise direction and
remove it.
›
Place a new bulb in the housing and turn it in a clockwise direction as far as it
will go.
›
Insert the housing containing the light bulb in the lamp housing in the oppo-
site direction to arrow
›
Screw the housing in the opposite direction to arrow
place.
.
2
and » Fig. 173 on page 137.
D E
and on page 136 first.
.
2
1
1
.
2
until it clicks into