Removing/installing taillights
Fig. 181 Remove light / pull out connector
Read and observe
and
Removing
›
Open up the flap in area
in the direction of arrow
A
›
Insert the screwdriver under the bottom edge of the locking mechanism
and pull out the locking mechanism on the connector in the direction of ar-
row
.
2
›
Press the catch
in the direction of arrow
C
›
Pull out the connector in the direction of the arrow
›
Hold the lamp firmly and unscrew the plastic nut
›
Remove the lamp carefully from the body.
Fitting
›
Insert the bulb holder in the light.
›
Carefully place the tail light assembly in the opening in the body and hold
firmly.
›
Screw in and tighten the plastic nut
›
Push the connector into the bulb holder and press down on the catch
the opposite direction to arrow
›
Fold back the cover in the opposite direction to arrow
CAUTION
Ensure that the vehicle paintwork and the tail lamp are not damaged when re-
moving and installing the taillight.
140
Do-it-yourself
on page 136 first.
» Fig. 181
1
.
3
.
4
.
D
» Fig. 181
.
D
.
2
.
1
Replacing the bulbs in the tail lamp assembly
Fig. 182 Inner part of the lamp
Read and observe
Changing a bulb
›
.
Press down on the lamp holder
the lamp.
B
›
Turn the light bulb counter-clockwise to the stop and remove it from the
bulb
holder» Fig. 182
›
Insert a new bulb into the holder and turn in a clockwise direction to the
stop.
›
Insert the bulb holder in the light.
The lamp holder must engage firmly.
in
B
and
on page 136 first.
» Fig. 182
- and remove the holder from
- .