mgmt set addr <addr> netmask <mask>
Sets the IP address and netmask of the MGMT interface
mgmt set gw <addr>
Sets the default gateway of the device
mgmt
mgmt show
Displays the IP address and netmask of the MGMT interface and default
gateway of the device.
ping <address> [<size>]
Pings from the device to
ping
Use
reboot
reboot
Reboots the device. Returns user to the login prompt after reboot.
ssh [enable | disable | fingerprint]
Enables or disables SSH service, or displays the fingerprint of the SSH server's
ssh
public keys. If service is disabled, any sessions in progress are terminated. With
no argument,
telnet [enable | disable]
Enables or disables telnet service. If service is disabled, any sessions in progress
telnet
are terminated. With no argument,
upgrade <image name> <server address> ["tftp"]
Upgrades the Linktropy firmware. If the image is not located in the root
directory of the HTTP server or TFTP server, the image name must include the
full path name.
upgrade
Specify the IP address of the HTTP or TFTP server.
By default, the Linktropy WAN Emulator will use HTTP to download the firmware
image. Specify "tftp" to use TFTP instead.
version
version
Displays the operating firmware version.
S
11 C
L
ECTION
OMMAND
INE
address
to stop.
CTRL-C
reports current status of the service.
'ssh'
I
NTERFACE
with the specified sized packets.
reports current status of the service.
'telnet'
37
Need help?
Do you have a question about the Linktropy Mini2 and is the answer not in the manual?