Removing The Rear Drum - Wacker Neuson RD 12A Repair Manual

RD 12/RD 12A
9.7

Removing the Rear Drum

Prerequisites
Jacks
Crane and appropriate sling
Procedure
Follow the procedure below to remove the rear drum.
1. Chock the front drum.
2. Support the machine with jacks (a).
3. Remove the drum support covers (b).
4. Remove the bearing cover (c) from the non-drive-motor side of the drum.
5. Disconnect and remove the brake cable (d) from the drum.
6. Remove the metal hydraulic lines (e) from the hydraulic hoses. Cap and store the
hydraulic hoses in the machine frame.
This procedure continues on the next page.
wc_tx000671gb.fm
c
e
71
Disassembly & Assembly
a
b
wc_gr004194
d
wc_gr004195
wc_gr004196