Installing The Steering Valve - Wacker Neuson RD 12A Repair Manual

Disassembly & Assembly
9.30

Installing the Steering Valve

Prerequisites Machine OFF and engine cool
Procedure Follow the procedure below to install the steering valve.
1. Position the steering valve (j) and bracket (h) into the control console. Secure the steer-
ing valve to the bracket with screws (i) .
2. Secure the bracket (h) to the console with the screws (g).
3. Connect the hydraulic lines (f).
4. Install the choke control (e).
This procedure continues on the next page.
wc_tx000671gb.fm
j
h
f
110
RD 12/RD 12A
g
g
wc_gr004240
e
i
h
wc_gr004241