Checking The 20A Main Fuse - Wacker Neuson RD 12A Repair Manual

RD 12/RD 12A

4.1 Checking the 20A Main Fuse

Key switch in OFF position.
Prerequisites
There are three 20A fuses protecting the circuits in the RD 12:
Background
Main electricals
Voltage regulator circuit
Optional light circuit
Procedure Follow the procedure below to check the 20A main fuse.
1. Open the hood and locate the fuse carrier (a).
2. Remove the protectctive cover from the fuse carrier.
3. Check the condition of the 20A main fuse (b).
Is the 20A fuse OK?
4. Re-install the 20A main fuse and the protective cover to the fuse carrier.
The 20A main fuse has now been checked.
wc_tx000746gb.fm
Wacker Neuson Engine Starting System
a
Yes ____
Replace the 20A main fuse with one of same size and rating.
Continue
No ____
41
b
wc_gr004128