Table of Contents
Advertisement
t
a
alK
round
Press, (or press and hold), the assigned PF key to activate
the Talk Around feature when you are operating on duplex
channel systems (separate receive and transmit frequen-
cies, utilizing a "repeater" station). The Talk Around
feature allows you to bypass the repeater station and talk
directly to a station that is nearby. This feature has no ef-
fect when you are operating on "simplex" channels, where
the receive and transmit frequencies are already the same.
When the Talk Around feature is activated, the "
will be indicated on the display.
Note that your dealer may have mode provision for "Talk
Around" channels by programming "repeater" and "Talk
Around" frequencies on two adjacent channels. If so, the
key may be used for one of the other Pre-Programmed
Functions.
Note: The Talk Around feature does not activate on the
Simplex Channel.
reset
Press (or press and hold) the assigned PF key to reset the
RFC (Ready for Communication) condition.
24
a
o
dVanced
Peration
c
all
Press, (or press and hold), the assigned PF key to send a
pre-programmed call signal of the 5-Tone.
c
ode
Press, (or press and hold), the assigned PF key to select a
2-Tone or 5-Tone encode code from the pre-programmed
encode list.
c
ode
You can change the desired digit of the 5-Tone encode
" icon
code using this function:
r Press, (or press and hold), the assigned PF key.
r Enter the desired 5-Tone encode code directly from
the [ A ] / [ B ] keys (select the code number) and SIDE-
1/SIDE-2 buttons (select the code digit).
r Press the [ D ] key to store the new setting. The display
indicates "-.SET.-" briefly, then reverts to the normal
channel indication.
You may cancel the new setting by pressing the [ C ]
key. In this case, the display indicates "-.CANCEL.-"
briefly.
1
c
3
to
all
u
/d
P
oWn
s
et
VX-264 O
FCC ID: AXI11273020
IC: 10239A-11273020
M
perating
anual
Vertex Standard LMR, Inc.
Advertisement
Table of Contents
