Vertex Standard VX-264 Operating Manual page 22

Hand-held analog transceiver designed for business communications in the vhf/uhf land mobile bands
Hide thumbs Also See for VX-264:
Table of Contents

Advertisement

Vox s
et
You can manually adjust the VOX Gain using this function:
r Press, (or press and hold), the assigned PF key. A tone
will sound, and the current VOX Gain level will ap-
pear on the display.
r Press the [ A ] / [ B ] button to select the desired VOX
Gain level.
r Press the [ D ] key to store the new setting. The display
indicates "-.SET.-" briefly, then reverts to the normal
channel indication.
You may cancel the new setting by pressing the [ C ]
key. In this case, the display indicates "-.CANCEL.-"
briefly.
e
mergencY
The VX-264 includes an "Emergency" feature in either
analog or digital modes, which may be useful for alerting
another party monitoring on the same frequency as your
transceiver's channel.
Press and hold the assigned PF key for a pre-programmed
period to initiate an emergency call on the pre-defined
channel. The "-. EMG. -" indication will be indicated on
the display. For further details contact your Vertex Stan-
dard dealer.
To revive the radio from the Emergency mode, just press
and hold again the assigned PF key or turn off the radio.
20
a
o
dVanced
Peration
l
one
Press, (or press and hold), the assigned PF key to activate
the Lone Worker feature. The Lone Worker feature is
designed to emit an alarm for 30 seconds when the Lone
Worker Timer (programmed by your Vertex Standard
dealer) has expired.
Press again, (or press and hold again), the assigned PF
key, the Lone Worker feature is disabled. If the user does
not reset the timer by pressing the PTT switch, the radio
switches to Emergency mode.
Note: when the Lone Worker feature is "on" and "off", the
display indicates "L-WK.ON" and "L-WK.OFF" briefly.
g
rouP
Press, (or press and hold), the assigned PF key to select a
different group of channels. A group number will appear
at the upper right corner and a group name will appear
briefly on the display.
c
hannel
Press, (or press and hold), the assigned PF key to select a
different channel. A channel name will appear briefly on
the display.
W
orKer
u
/d
P
oWn
u
/d
P
oWn
VX-264 O
FCC ID: AXI11273020
IC: 10239A-11273020
M
perating
anual
Vertex Standard LMR, Inc.

Advertisement

Table of Contents
loading

Table of Contents