Table of Contents
Advertisement
Pri-2
Press, (or press and hold), the assigned PF key to recall
the pre-programmed Priority Channel of the current group
(Priority-2) by your Vertex Standard dealer directly. When
PRI-2 channel is recalled, the "P" icon will appear on the
display.
s
can
The Scanning feature is used to monitor multiple chan-
nels programmed into the transceiver. While scanning, the
transceiver will check each channel for the presence of a
signal, and will stop on a channel if a signal is present.
To activate scanning:
r Press, (or press and hold), the assigned PF key to acti-
vate scanning.
r The scanner will search the channels of each channel,
looking for active ones; it will pause each time it finds
a channel on which someone is speaking.
r Press again, (or press and hold again), the assigned PF
key to disable scanning, and receive the channel which
was chosen when pressed the PF key.
VX-264 O
M
perating
anual
a
o
dVanced
Peration
Note: Your dealer may have programmed your radio to
stay on one of the following channels if you press the
PTT switch during scanning pause:
"Scan Pause" channel ("Talk Back")
"Last Busy" channel
"Priority-1" channel
"Priority-2" channel
"User Programmed" channel ("Select Channel")
The channel which defined in the CH Selector
g
rouP
The scanning feature is used to monitor multiple chan-
nels programmed into the transceiver. While scanning, the
transceiver will check each channel of the programmed
group for the presence of the signal, and will stop on a
channel if a signal is present.
Press, (or press and hold), the assigned PF key to activate
the scanning on the selected groups.
Press again, (or press and hold again), the assigned PF
key to disable the group scan mode, and receive the chan-
nel which was chosen when pressed the PF key.
When the Group Scan is activated, the display indicates
"GRP.SCAN" briefly.
knob.
s
can
FCC ID: AXI11273020
IC: 10239A-11273020
21
Vertex Standard LMR, Inc.
Advertisement
Table of Contents
