Table of Contents
Advertisement
4.3.2
OPERATION
ALL MODELS
1)
Ensure all red emergency stops are out.
2)
Turn the Base/Platform selector at the ground control station to Platform (anti-clockwise).
3)
For Battery powered operation, go to step 7).
4)
For Diesel powered operation, go to step 5).
DIESEL ENGINE
5)
COLD ENGINE: - turn the Diesel Glow selector left to engage the glow plug pre-heat system
and hold for 10 seconds, then turn the Diesel Start selector to the Start position (right) and the
engine will fire.
6)
WARM ENGINE: - turn the Diesel Start selector to the Start position (right) and the engine will
fire.
Note: Unless the diesel engine is running, the HR21 Hybrid will automatically default to the electrical
power source (battery).
ALL MODELS
7)
Depress the footswitch (if available) or push and hold green power button on the platform
control box.
8)
Select a function and operate the hydraulic control levers in full accordance with manufacturers
operating and safety manual.
9)
To return control to the base turn Base/Platform selector to the Base position (clockwise).
10)
When not in use return booms to the stowed position. Turn the Base/Platform selector on the
ground control station to the centre Off position, remove key and chock wheels.
English/USA – 11/09
Original Instructions
NEVER START THE NIFTYLIFT IF YOU SMELL PETROL (GASOLINE), LIQUID
PROPANE OR DIESEL. THESE FUELS ARE FLAMMABLE.
BEFORE OPERATING THE NIFTYLIFT ENSURE THAT EACH OPERATOR HAS
READ AND FULLY UNDERSTOOD THE OPERATING MANUAL. FAILURE TO DO
SO MAY RESULT IN DEATH OR SERIOUS INJURY.
ALWAYS ENSURE THE AERIAL PLATFORM IS ON A FIRM LEVEL SURFACE
AND THE AREA IS FREE OF ANY OVERHEAD OBSTRUCTIONS.
ENGAGING THE RED EMERGENCY STOP BUTTON WILL SHUT DOWN THE
ENGINE, AND THE ELECTRIC CIRCUIT PREVENTING OPERATION OF ANY
FUNCTION.
Operating & Safety Instructions
HR Series
29
Hide quick links:
Advertisement
Table of Contents
