Table of Contents
Advertisement
3.
Service type : choose DTV to only search for TV channels, Radio to only
search for radio All
4.
Press OK to start scanning.
8.2 SCR/Unicable System
For single-antenna converter (LNB) / satellite installations with SCR / Unicable
technology for the distribution of satellite signals to multiple points of use
(receivers) with a single cable, you must set the LNB type with the Unicable
value and enter the appropriate configuration:
Canale IF : User number corresponding to the channel assigned to the
TV/Receiver regarding the SCR system. Each receiver connected to the same
system must use a different IF channel.
Central Freq. : main frequency of the band/SCR channel assigned to the user.
Typical values for interfacing with other receivers/tuners are
IF Channel
Freq.
1210
Press Exit to save settings and return to the previous screen and continue with
the channel search as shown in paragraph 8.1.2.
CAUTION
If two receivers are connected in cascade to the antenna signal via the LNB OUT
pass-through connector, they can not operate simultaneously. When a receiver
is switched on, the other must be placed in stand-by (not supplied with the
tuner) and vice versa
To connect multiple receivers to a SCR system, do not use the connection
through antenna receiver, but use a suitable divider external signal.
8.3 System DiSEqC 1.0/1.1
The DiSEqC 1.0 / 1.1 protocol has been developed for receiving multiple
satellites via antenna systems with multiple converters, also known as multi-
feed, and up to four different orbital positions for the DiSEqC 1.0 and up to
sixteen for DiSEqC 1.1.
8.3.1 Antenna e satellite configuration
From the Antenna Set Up perform the following options:
Satellite : chose the desired satellite. Highlight the satellite and press OK
1.
to confirm and press ►.
16
1
2
1420
3
4
1680
2040
Hide quick links:
Advertisement
Table of Contents
