Organization Of Channel List; Favorites List; Satellite Mode - Tele System Palco19 LED07 T2S2HEVC User Manual

7.3 Organization of channel list.

Press the MENU button; in CHANNEL menu, select the item using ▼, Program
Edit and confirm with the OK button.
You will see the channel list with the following options available:
Red button (Delete): to delete one or more channels select the channel with
the ▲/▼, buttons and press the red button to confirm the cancellation.
Blue button (Skip): select the channel and press the Blue button; if activated,
the channel can only be displayed when recalled by using the number buttons
on the remote.
Yellow button (Move): to move a channel, select the channel you want to move,
press the Yellow button, use the arrow keys to move the channel to the desired
position or enter the desired position number, then press OK to confirm.

7.4 Favorites list

You can create a favorite channels list for DTV channels (terrestrial signal):
Once the option Program Edit and the channel you want to add to the Favourites
list has been selected, press the FAV button; Repeat for each channel you want
to add. After you create the list, to access it, simply press the FAV button and
select the channel with the arrow keys ▲/▼ and OK to confirm.
You can later remove one or more channels by performing the same procedure,
selecting the channel you want to delete, and pressing the FAV button.

8 Satellite mode

To activate the digital channel reception mode, press the Source button, select
Satellite.
You can scan the frequencies available with your satellite antenna system,
automatically searching for all the satellite channels from the first installation
(see paragraph 6.8) or through an automatic scanning available in the Channels
menu.
Dish Setup: the basic settings to allow the use of the TV with a single Universal
LNB (Low Noise Block converter) system (commonly used for satellite systems
in Italy); in the event your system is done with a different configuration, you
must appropriately change the antenna settings.
ATTENTION!!!
The wrong antenna configuration can result in the failure to load some or all
channels. If you do not know the characteristics of your antenna system and/or
are unable to properly configure the receiver yourself, you may want to consult
14