Main Menu Description; First Installation; Automatic Channel Search - Tele System Palco19 LED07 T2S2HEVC User Manual

HDMI: to activate the HDMI input.
PC: to activate the PC mode
USB: to access content loaded on a USB memory. (See Chapter 16)

6.7 Main Menu description

Press the MENU key to bring up the main menu and use the arrow keys ▲/▼
and t / u to navigate through the titles of menu. Press the MENU button to
return to the previous menu or EXIT to exit. The menus are: Channels,
Images, Sound, Time, Security, Settings .

6.8 First installation

When the TV is turned on for the first time or after a factory reset, a wizard will
allow the simple and optimal installation of the TV:
Select the installation language (OSD Language) with the t / u arrow keys
(default Italian). Go on to the next step by pressing the ▼ button.
Then select the installation country (Italy default) using the arrow keys t / u
Press OK to move on to the next step.
Select the tuner signal type (DVB-T2 or Satellite) to start searching for channels
and press OK to start an auto scan.
At the end of the DVB-T2 scan, a list of LCN conflicts to be resolved manually
will appear. The user can choose the channel to be assigned to each disputed
LCN position manually or automatically all at once (recommended).
If you choose satellite, you can choose to load a default satellite channels list by
pressing OK and confirming Yes (left arrow) to the confirmation request; or
proceed with normal installations, once the satellite parameters are set, scan
type, channel type and type of service, by pressing OK and choosing No (right
arrow) on the next screen.

6.9 Automatic channel search.

Press the MENU button; in CHANNEL menu using ▼, select the entry Auto
tuning and confirm with the OK button.
Select the country of installation (default Italy) and press OK to start an
automatic channel search.
At any time you can:
Press EXIT or Menu to terminate the search
12