Basic Function; Power / Standby; Program Selection; Volume Regulation - Tele System Palco19 LED07 T2S2HEVC User Manual

6 Basic Function

6.1 Power / Standby

While the TV is in operation, to turn it off, press the Power button on your
remote control. The LED on the front panel of the TV will change from green to
red.
To switch the TV on again, press the Power button (on the remote control or on
the TV).

6.2 Program selection

To select a program, press the P+/P- buttons or the / buttons on the
standard remote control for a sequential selection; use the numeric keys for
direct channel selection.

6.3 Volume regulation

Press the V- / V+ buttons or the buttons t / u on the standard remote control
to increase / decrease the volume.

6.4 Mute (temporary)

Pressing the MUTE button, the sound is interrupted and the video shows the
symbol of the function. To reactivate the sound, you can press the MUTE button
again or one of the volume buttons V- / V +.

6.5 Program recall

You can recall the previously selected program by pressing the BACK button
and by pressed it again, it returns to the program you were watching.

6.6 Source selection

By pressing the Source button, you can select the TV mode:
DTV: To activate the Digital TV mode and allow the reception of digital TV
programs;
SCART: To enable SCART input
AV: to enable the AV input (RCA)
YPbPr: to activate the YPbPr input.
11