Inserting Batteries; Pc Mode; Menu For Pc Mode - Tele System Palco19 LED07 T2S2HEVC User Manual

4.3 Inserting batteries

You have to replace or install the batteries when:
• You buy the product.
• the remote control does not work properly.
Once you open the battery door located on the back of the remote, insert the 2
batteries (AAA) in the compartment, making sure to respect the correct polarity
as indicated.
Remove the used batteries, which must be disposed of separately from
household waste taking them to any store or collection point and then repeat
the operations for insertion.
To avoid damaging the remote control with the leakage of corrosive liquid, you
should remove the batteries if you plan not to use the device for a long period of
time. Avoid using different types of batteries or dead and new batteries at the
same time.

5 PC Mode

Since it is equipped with a VGA video card, the TV can be used as a PC screen
following this procedure:
With the equipment turned off, connect the two devices via a D-SUB cable (15-
pin) for the Video part and an audio cable for the audio portion.
Reset the electrical connection of the TV and PC. Turn on the TV and from your
remote control,
Turn your computer on.

5.1 MENU FOR PC MODE

After switching to PC mode, you can adjust various settings by pressing the
MENU button on the front panel or the remote control: the usual menu will
appear, which will have some functions active only in this mode: to navigate
through the menu use the ▲/▼ keys. Change the values using the t / u
buttons.
10
press the AV button. Select the PC mode.