Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Tele System Palco19 LED07 T2S2HEVC
Summary of Contents for Tele System Palco19 LED07 T2S2HEVC
- Page 1 TELE System...
- Page 3 TELE System Digital Srl announces that due to software and/or hardware changes that aim to improve the product, you may find inconsistencies between...
-
Page 4: Table Of Contents
Index Safety ......................... 3 Description of the TV ................... 5 Front ......................5 Keyboard ....................5 Rear panel connections ................6 Connections ......................7 Antenna connections/cable TV channel ........... 7 Connection to an external device ............. 7 Remote Control ....................... 8 Standard remote control ................ -
Page 5: Safety
Automatic scanning ................19 Security – System Block ..................20 Image Menu ......................20 Audio Menu ......................21 Time settings ...................... 21 Settings Menu ....................21 USB Media player ....................22 Troubleshooting ....................23 Technical Specifications .................. 25 1 Safety ATTENTION: TO REDUCE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE BACK COVER AND DO NOT USE METAL TOOLS. - Page 6 The screen is formed by a thin glass and protected by a plastic foil, liquid abrasives or streaks will permanently ruin the LED/LCD panel. Do not clean the screen with substances such as acetone, ethyl alcohol, toluene, ethyl acid, methyl or hydrogen; these substances ruin the LED/LCD panel. Position the TV so that it is easier to access the power outlet.
-
Page 7: Description Of The Tv
2 Description of the TV 2.1 Front LED: Status Indicator, Red = Standby, Green = Power IR sensor: remote control receiving sensor Warning! The position of the LED and IR sensor may not correspond exactly to the one shown in the picture. 2.2 Keyboard The TV keyboard is on the right side of TV itself. -
Page 8: Rear Panel Connections
2.3 Rear panel connections On the back side of the TV, there are connections and A/V inputs; horizontal side (from left to right): 12V power supply (DC IN 12V) Headphone output (3.5 mm jack) VGA port (PC) SCART input PC Audio input (PC Audio IN) SATELLITE RF Antenna Input (Type F) TERRESTRIAL Antenna RF input (IEC) Coaxial digital audio output (COAXIAL) -
Page 9: Connections
3 Connections 3.1 Antenna connections/cable TV channel To view the television channels, you can connect the TV to one of the following devices: A terrestrial antenna and/or a satellite antenna system. In either case, connect the antenna cable (75 Ω) to the coaxial jacks located in the rear of the TV. -
Page 10: Remote Control
4 Remote Control 4.1 Standard remote control POWER: On / Off Stand-by Mute: temporary interruption of audio. Source: source selection Video: change the video mode. Sound: change the audio mode AUDIO: audio choice. A.Ratio: choice of image format. TASTI NUMERICI: direct channel selection. FAV: Displays the favorite channel list. -
Page 11: Simplified Remote Control
TIMESHIFT: activates the Timeshift function : stops the playback/recording ■ not active : starts / pauses playback ► ▌▌ ◄◄/►►: rewind / fast forward : back forward one track / song / picture ◄◄/►► ▐ ▌ TXT: accesses the Televideo. SUBTITLE: activates subtitles (if present) GUIDE: electronic program guide (EPG) 4.2 Simplified remote... -
Page 12: Inserting Batteries
4.3 Inserting batteries You have to replace or install the batteries when: • You buy the product. • the remote control does not work properly. Once you open the battery door located on the back of the remote, insert the 2 batteries (AAA) in the compartment, making sure to respect the correct polarity as indicated. -
Page 13: Basic Function
6 Basic Function 6.1 Power / Standby While the TV is in operation, to turn it off, press the Power button on your remote control. The LED on the front panel of the TV will change from green to red. To switch the TV on again, press the Power button (on the remote control or on the TV). -
Page 14: Main Menu Description
HDMI: to activate the HDMI input. PC: to activate the PC mode USB: to access content loaded on a USB memory. (See Chapter 16) 6.7 Main Menu description Press the MENU key to bring up the main menu and use the arrow keys ▲/▼ and t / u to navigate through the titles of menu. -
Page 15: Dvb Mode
ATTENTION! The automatic channel search cancels all the previously memorized channels. 7 DVB Mode To activate the reception mode for digital channels, press the Source button, choose DTV. You can scan the frequencies available in your area, searching all digital channels automatically (see section 6.9) or manually. -
Page 16: Organization Of Channel List
7.3 Organization of channel list. Press the MENU button; in CHANNEL menu, select the item using ▼, Program Edit and confirm with the OK button. You will see the channel list with the following options available: Red button (Delete): to delete one or more channels select the channel with the ▲/▼, buttons and press the red button to confirm the cancellation. -
Page 17: Simple Installation
a professional installer for advice. The power and signal quality indicators refer to the first transponder of the chosen satellite list. Changing the DiSEqC 1.0 / 1.1 parameters, DiSEqC 1.2 / DiSEqC 1.3 , you will get three different configuration modes. 8.1 Simple installation For the single inverter antenna (LNB)/satellite with direct connection between the TV and antenna, they DiSEqC commands or other special communication... -
Page 18: Scr/Unicable System
Service type : choose DTV to only search for TV channels, Radio to only search for radio All Press OK to start scanning. 8.2 SCR/Unicable System For single-antenna converter (LNB) / satellite installations with SCR / Unicable technology for the distribution of satellite signals to multiple points of use (receivers) with a single cable, you must set the LNB type with the Unicable value and enter the appropriate configuration: Canale IF : User number corresponding to the channel assigned to the... -
Page 19: Channel Search For Satellite
LNB type : inferior/superior frequency of the local oscillator of the converter LNB power : LNB supply for switching between horizontal and vertical polarization 22KHz : signal at 22KHz switching between high and low band Tone burst : none. DiSEqC 1.0 o DiSEqC 1.1 : select the LNB number based on its aerial system (i.e. -
Page 20: Diseqc 1.3
Subsequently, you need to configure the Western and Eastern limits of the system rotation by pressing the RED button Set limit: Continuous movement : moves the motor West/East via the◄/► arrows. Step motion : moves the motor with an indexing motion. Set West limit : defines the Western limit of the motor Set East limit : defineds the Eastern limit of the motor Go to reference : recalls the default position of the motor (usually... -
Page 21: Automatic Scanning
Longitude Direction: Choose East or West Longitude Angle: Enter the degrees longitude Latitude Direction: Select North or South Latitude Angle: Enter the relative latitude degrees Press Exit to save settings and return to the previous screen and continue searching channels like illustrated in paragraph 8.1.2. 8.5 Automatic scanning In the event you want to scan satellite channels (for example to update the channel list) and the antenna system is a Simple type or a previously configured... -
Page 22: Security - System Block
9 Security – System Block To access the menu you must enter the password set at the time of initial installation (default PIN: 0000). System block If set on ON, the access to some functions is password protected. Blocked channel If activated on one or more channels, vision of these channels is permitted only after entering a password. -
Page 23: Audio Menu
Advanced settings: in the submenu, Noise Reduction (NR), MPEG NR and Dynamic Contrast settings are available; using these functions, you can reduce interference and noise formed in the picture. 11 Audio Menu From this menu you can adjust the TREBLE, BASS, and Sound BALANCE audio levels. -
Page 24: Usb Media Player
Channels update feature allows you to enable / disable the automatic scanning channels when the TV is in operating mode. During normal operation, if the function is active (ON), the TV dynamically performs an update of the DVB- T channel list (terrestrial) in the event that changes have been introduced within the tuned frequency. -
Page 25: Troubleshooting
15 Troubleshooting If you have problems using the TV, here are some suggestion on how you can solve them yourself. Before contacting a service department (warranty), try to carry out some of the tests suggested in the table. No Audio/Video signal ˜... -
Page 27: Technical Specifications
16 Technical Specifications Model PALCO19LED07 – PALCO22 LED07 – PALCO24 LED07 Diagonale 18,5” (47,0 cm) 16:9 Wide Display Diagonale 21,5” (54,6 cm) 16:9 Wide Diagonale 23,6” (59,9 cm) 16:9 Wide 1366(H) x 768(V) – PALCO19 e PALCO24 Resolution 1920(H) x 1080(V) – PALCO22FHD 1000:1 –... - Page 28 TV LED PALCO22 LED07T2/S2 HEVC 28000106 TV LED PALCO24 LED07T2/S2 HEVC Tele System Electronic declares under its own responsibility that this product meets the essential requirements of the European directives 2014/30/EU (EMC - Electromagnetic Compatibility), 2014/35/EU (LVD - Low Voltage Directive) and 2009/125/CE reg.
Need help?
Do you have a question about the Palco19 LED07 T2S2HEVC and is the answer not in the manual?
Questions and answers