Preparing For Installation; Unpacking And Inspection; Temperature And Humidity Requirements; Power Supply - 3Com WL-607 Quick Installation Manual

Note: The AP9152 provides a reset button and a security slot.
Descriptions of the interfaces on the AP9152:
Interface Standards and
silkscreen protocols
CONSOLE RS/EIA-232
IEEE802.3
ETHERNET IEEE802.3u
IEEE802.3af
Caution: When connecting a cable to an interface, pay attention to the interface
silkscreen to avoid connection mistakes.
Appendix B Preparing for Installation

Unpacking and Inspection

Before unpacking the unit, make sure that the package is intact, without any sign of
damage. When unpacking the unit, avoid excessive force, otherwise, the unit inside
the package may get damaged.
After unpacking the unit, check that all items listed on the packing list are contained. If
any of the items are missing, contact your local dealer immediately.

Temperature and Humidity Requirements

The operating temperature and humidity requirements are as follows:
Specification
Operating temperature
Storage temperature
Relative humidity (non-condensing)

Power Supply

The AP9152 supports PoE power supply.
Description
The console interface is used for device
configuration and management.
The Ethernet interface can serve as an uplink
interface to access the Internet and as a PoE
interface at the same time.
Range
0° C to 45° C (32° F to 113° F)
–40° C to +70° C (–40° F to +158° F)
5% to 95%
iii