Security - Supermicro A2SAP-H User Manual

4.4 Security

This menu allows the user to configure Security settings.
Password Check
Use this feature to determine when a password entry is required. Select Setup to require the
password only when entering setup. Select Always to require the password when entering
setup and at each bootup. The options are Setup and Always.
Setup Administrator Password
Use this feature to set the administrator password which is required to enter the BIOS setup
utility. The length of the password should be from 3 characters to 20 characters long.
User Password
Use this feature to set a user password which is required to log into the system and to
enter the BIOS setup utility. The length of the password should be from 3 characters to 20
characters long.
 Secure Boot
Secure Boot Support
Select Enable for secure boot support to ensure system security at bootup. The options
are Enabled and Disabled.
73
Chapter 4: BIOS