Advertisement
10
UPPER CHUTE (See Figs. 10A & 10B)
No hardware required
1. Lower mower deck to its lowest cutting position.
2. Assemble upper chute by inserting curved end into
hole in back of cover.
NOTE: Handle carefully so as not to damage full bag in di -
ca tor.
3. Push in and turn upper chute until it is in line with lower
chute.
4. Align the bosses on lower chute with alignment slots
on upper chute and slide together.
5. Secure with rubber latch by hooking hole in latch over
latch pin.
UPPER
CHUTE
COVER
FULL BAGGER
INDICATOR
HANDLE
LOWER
CHUTE
FIG. 10A
ALIGNMENT
SLOTS
LATCH PIN
RUBBER
LATCH
BOSSES
FIG. 10B
11
WHEEL WEIGHTS (See Fig. 11)
Use Hardware - - GROUP "H"
1. Assemble wheel weights and U-bolts onto the outside
of front wheels and hold in position.
2. Fasten locknuts onto U-bolts on the inside of wheel
and tighten securely.
LOCKNUTS
12
LEVEL MOWER DECK
Be sure deck is properly leveled for best mower per for man ce.
See your tractors owner's manual for ins truc tions.
10
FRONT WHEEL
WHEEL
WEIGHT
U-BOLT
FIG. 11
Advertisement
