6. POWER FAILURE AND EMERGENCY LOWERING
In the event of a power failure, the elevator is equipped with a Battery Back-Up
system that allows you to lower the elevator from the inside of the cab. This
device operates on batteries and is only activated if a main power supply failure
occurs. The operation is as follows:
1 For elevators with automatic operation, press any Landing button below
the floor where the elevator is located.
2 For elevators with constant pressure operation, press and hold any
Landing button below the floor where the elevator is located. Maintain
constant pressure until the cab is level with the lower landing.
3 On arrival at the selected floor, the landing door will automatically unlock.
4 If there is an automatic gate, the gate will open.
5 Release the Landing button, remove the key, open the manual gate (if
equipped) and exit the cab.
7. EMERGENCY OPENING OF AUTO SLIM LANDING DOORS
To open the auto slim landing doors in an emergency, first turn off power at the
main disconnect. Then insert the emergency key (shown below) into the hole
at the top of the landing doors, turn the key to unlock the doors and manually
open the doors.
When power is turned back on, the elevator will go to the lower landing to
relearn the doors.
Part No. 000842, 30-m06-2017
Infinity & Infinity HD (Micro-6) Owner's Manual
11