Table of Contents
Advertisement
ored boxes located just above the RTC bar. For example, click-
ing on the green channel 40 box will zoom in to channel 40.
Single Channel Spectrum
The single channel screen displays RSSI valued data within
the channel specified (a 20 MHZ span). To return to the full
spectrum mode, press the "BACK TO FULL SPECTRUM" but-
ton.
Access Point List
The access point list screen provides the user with a list of
access points that are seen by the receiver. The user can then
"zoom in" on a particular access point for further analysis as
well as for pinpointing the AP's location.
MAC List
The MAC list is shown on the main access point list screen.
This list shows each of the access points seen and other infor-
mation on each of the access points. This information includes
such fields as the channel number associated with each access
point, the MAC address and SSID of the access point, as well
as the RSSI value in dBm of the access points.
The color of the information text for each access point will
change as the RSSI value increases and decreases. The scale
of colors are shown on the top of the list. White is the stron-
gest value while red is the weakest. It is loosely based on
the colors of stars, white being the hottest and red being the
coolest.
Also, there are two pages of the access point list. To flip
between these two pages, use the up and down arrows pro-
vided on the bottom of the screen in the toolbar.
Page 6
Advertisement
Table of Contents
