Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for ionmax Ion681
Summary of Contents for ionmax Ion681
- Page 1 USER MANUAL...
-
Page 2: Table Of Contents
DEAR CUSTOMERS Thank you for purchasing the Ionmax Ion681 Dehumidifier. The Ionmax Ion681 helps to monitor the humidity and remove excess moisture from the air. This helps protect your home from the formation of mould, spots and corrosion. The integrated humidistat sensor automatically turns the unit ON/ OFF and ensures unmonitored, ongoing operation for efficient dehumidification in your home. -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE OPERATING. WARNING - This appliance is intended for use in a domestic environment only. Any other use is not recommended by the manufacturer and may cause fire, electrical shocks or other injury to person or property. -
Page 4: Features
● Auto switch off when water tank is full or removed TO AVOID ELECTRICAL SHOCK, DO NOT TAMPER WITH THE UNIT. TAMPERING WITH THE UNIT WILL VOID THE WARRANTY. SPECIFICATIONS Model Ionmax ION681 Dehumidifying Rate Approximately 600ml/day (at 30ºC, 80%RH) Tank Capacity 2.2L... -
Page 5: Product Diagram
PRODUCT DIAGRAM On / Off button Dry air outlet (Both sides) Auto / Manual mode button Carry handle (On Auto mode, unit will only Air inlet operate when RH > 65% and stop when RH < 55%. Screw (Unscrew this to clean On Manual mode, unit will the filter (12)) operate continuously.) -
Page 6: Operating Instructions
OPERATING INSTRUCTIONS Plug in the unit’s power supply into a 220-240V AC electrical outlet. ● Please use an AC electrical outlet as stated on the label. A higher voltage may lead to malfunction causing fire or electric shock. ● Do not use the unit when the power cord or plug is broken, or the socket is loose. - Page 7 WHEN TANK IS FULL OF WATER The dehumidifier will stop working when the water tank is full and the indicator will turn red. To continue using the unit, remove the water tank, empty it, and replace the water tank into the unit, as shown in the diagram below. ATTENTION ●...
-
Page 8: Maintenance Instructions
MAINTENANCE INSTRUCTIONS CLEANING THE UNIT Before cleaning the unit, turn the unit off and unplug it from the power socket to prevent electric shock or accidents. Wait until the unit has cooled down before unscrewing the screw and removing the filter for cleaning. MAINTAINING THE EXTERIOR OF THE UNIT Use a wet and soft cloth to wipe the outside of the unit. -
Page 9: Troubleshooting Guide
TROUBLESHOOTING GUIDE Problem Probable Cause Solution Power cable not Plug in the power cord plugged in Reset your circuit breaker. Household circuit If necessary, contact a breaker licensed electrician. Stop operating and unplug Unit not powering on Unit is damaged or the power source. -
Page 10: Warranty Details
support@andatech.com.au... -
Page 11: Warranty Registration
WARRANTY REGISTRATION Register your Ion681 online at my.andatech.com.au or fill out this form and forward to the address below with a copy of your proof of purchase. Contact us on 1300 800 200 or visit www.andatech.com.au for options to extend your warranty. - Page 12 1300 800 200 Version 2.1. Updated 18.07.2017.
Need help?
Do you have a question about the Ion681 and is the answer not in the manual?
Questions and answers