Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ionmax ION610
Summary of Contents for ionmax ION610
-
Page 2: Table Of Contents
INDEX IMPORTANT SAFETY INSTRUCTIONS .................. FEATURES ..........................SPECIFICATIONS........................2 PRODUCT DESCRIPTION ...................... UNIT SETUP..........................TO OPERATE SAFELY ......................OPERATING INSTRUCTIONS ..................... MAINTENANCE ........................PLEASE NOTE ........................TROUBLESHOOTING ......................WARRANTY DETAILS ......................WARRANTY REGISTRATION.................... -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE OPERATING. WARNING - This appliance is intended for use in a domestic environment only. Any other use is not recommended by the manufacturer and may cause fire, electrical shocks or other injury to person or property. When using electrical appliances, basic safety precautions should always be followed: 1. -
Page 4: Features
Antibacterial Dust Filter Prevents the growth of bacteria on the filter, improving the quality of air in your home SPECIFICATIONS Model: Ionmax Ion610 Voltage: 220-240V ~ 50Hz Power consumption: 280-460W Net weight: 5.1kg Dimensions (W x D x H): 269 x 174 x 445 mm... -
Page 5: Product Description
PRODUCT DESCRIPTION Automatic louvre Control panel Handle Air outlet Water tank Water level indicator Hand grip for easy removal Air outlet Air filter Air inlet... -
Page 6: Unit Setup
UNIT SETUP Place the unit in an upright position on a stable, level surface. (Please ensure unit is not sitting on its own cable) min 60cm Air outlet Please ensure the unit is a safe distance away from walls and furniture (see image on the left). min 40cm Air inlet (When louvre down) -
Page 7: Operating Instructions
OPERATING INSTRUCTIONS POWER LEVEL AUTO RELATIVE HUMIDITY ON and OFF Connect the power plug to the appropriate electrical socket outlet. Press the ON/OFF button to turn the appliance ON. Press the ON/OFF button again to turn the appliance OFF. Note: In the event of a power failure Once the power is restored after a power failure, the appliance will continue to operate at the selected settings prior to the power failure. - Page 8 OPERATING INSTRUCTIONS RELATIVE HUMIDITY Press the "RELATIVE HUMIDITY" button to select your desired humidity level. For example, if 50% RH is selected, the heater will operate and dehumidification will occur when the room humidity level is detected at above 50% RH. LAUNDRY (ALL LED’S LIGHT UP) MODE...
- Page 9 OPERATING INSTRUCTIONS POWER LEVEL Press the "POWER LEVEL" button to select the desired power level for the fan and heater AUTO HIGH (BOTH LED’S LIGHT UP) MODE DESCRIPTION Convenient automatic operation • Fan and Heater settings will be automatically controlled until the Auto specified humidity has been reached.
-
Page 10: Operating Instructions
OPERATING INSTRUCTIONS AUTO SWING LOUVRE Press the "SWING" button to select air louvre angle. WIDE FRONT HOLD (LED OFF) DESCRIPTION MODE The automatic louvre swings in an upward range of approximately 100° The automatic louvre swings in a front FRONT Front range of approximately 50°... -
Page 11: Maintenance
MAINTENANCE Cleaning the filter Clean your filter every 2 weeks to keep your air clean and prolong the life of your dehumidifier. 1. Turn off the unit and remove the filter from the unit. 2. Clean the filter gently using a vacuum cleaner with a smooth head attachment (do not use rotating brushes). - Page 12 TROUBLESHOOTING The following conditions are normal: 1. The fan is still running about 2 minutes after the unit is turned off. 2. The unit works within room temperature about 1~40ºC. It may stop operation out of this range or when the air inlet or outlet is covered. (The "CHECK" LED light will illuminate) 3.
-
Page 13: Please Note
PLEASE NOTE Smell coming from the dehumidifier When you first use the dehumidifier and periodically afterwards you might notice a smell coming from the dehumidifier. This is caused by the Zeolite desiccant material and is not a sign that the dehumidifier is faulty, nor is it harmful to humans or pets. The smell occurs because the Zeolite absorbs odours from items like cigarettes, cosmetics, hair sprays, building materials and new furniture and then when the desiccant is heated the smell is discharged into the room. -
Page 15: Warranty Registration
WARRANTY REGISTRATION Register your Ionmax Ion610 online at my.andatech.com.au Alternatively, fill out this form and forward to the address below with a copy of your proof of purchase. Andatech Pty Ltd PO Box 3038, Nunawading VIC 3131, Australia. : Ionmax Ion610... - Page 16 Version 1.0. Updated 28.03.2017.
Need help?
Do you have a question about the ION610 and is the answer not in the manual?
Questions and answers