Rotolight AEOS User Manual page 8

( MENU ) ADVANCED OPERATION
ME NU
You can enter the MENU by pressing both red
control switches together (or clicking and holding
down the left switch followed by the right control
switch). If you wish to leave MENU at any time,
you can return to the basic operation (BRI / COL) by
pressing both red control switches together again.
In 'MENU' Mode the left rotary control is Navigation,
and the left switch takes you 'back' one level. The
right rotary encoder is 'value/data entry' and the
right switch is 'activate/go/enter/start/trigger'
depending on the menu position.
In the MENU there are eight optional submenus
, through which you navigate by rotating the left
knob:
'FLSH', 'DISP' , 'FADE' , 'SFX ', 'F-DIM' , "CTRL", 'TECH'
, 'DEMO'
You can select/enter your desired sub menu
function by clicking the Right switch
You can leave the selected function by clicking the
Left switch, alternatively you can return to the basic
operation mode (BRI /COL) at any time by pressing
both switches together at the same time.
('FLSH') FLASH MODE
FLSH
Scroll to 'FLSH' Click the right switch to enter 'FLSH'
mode.
Note: in order to use the Flash, you must be IN fl ash
mode (indicated by shutter speed on the display. If you
see word 'FLSH', you are not IN fl ash mode and must
right click to ENTER fl ash mode)
Set your Camera to Manual fl ash mode
AEOS is not a TTL fl ash, it is a Manual Flash with
adjustable fl ash power, modelling light, colour
temperature and duration settings. Simple
operation: set your camera into Manual fl ash mode,
refer to the F stop table (p.11) for exposure guide,
take a test shot and either adjust fl ash power, or
distance to the subject to achieve optimal exposure.
08