Download Print this page

Rotolight SmartSoft Box Installation Manual

Download this manual

Rotolight SmartSoft™ Box

Installation Guide

1. The SmartSoft™ Box is

2. Update your AEOS 2 or AEOS

3. You'll need the Rotolight

compatible with the AEOS 2 and

2 Pro to the latest firmware

SmartSoft™ Box, 1x Small 1/4"

AEOS 2 Pro.

www.rotolight.com/support

knob and 2x Large M8 knobs.

NOTE – if you are using the AEOS yoke you

do not need the 2x Large knobs Supplied

with the SmartSoft™ Box.

4. Turn off the AEOS 2/AEOS

5. Attach the SmartSoft™ Box

6. Install the 2x Large M8 knobs

and fully tighten then and the

2 Pro and remove the Standard

and secure with the small knob,

Diffuser or Barndoors if they are

don't fully tighten at this point.

small knob.

installed.

NOTE – if you have the AEOS Yoke

NOTE – if you have the AEOS Yoke installed

loosen the larger knobs before installing the

installed now tighten the larger knobs

SmartSoft™ Box and small knob.

and small knob.

Need help?

Do you have a question about the SmartSoft Box and is the answer not in the manual?

Page 1 Rotolight SmartSoft™ Box Installation Guide 1. The SmartSoft™ Box is 2. Update your AEOS 2 or AEOS 3. You’ll need the Rotolight compatible with the AEOS 2 and 2 Pro to the latest firmware SmartSoft™ Box, 1x Small 1/4” AEOS 2 Pro.
Page 2 AEOS 2 Pro. You are now ready to shoot! 5. Now you are ready to attach our 3. Loosen the 2x Larger knobs 4. Remove the small 1/4” knob other light Modifiers and then the SmartSoft™ Box https://www.rotolight.com/product- category/light-modifiers/...