Rotolight AEOS User Manual page 18

You can meter 'AEOS' output which will be your
peak exposure during the Fire effect.
Click the right switch to activate the 'Fire' effect.
Rotate either the right knob to adjust the 'Fire'
effect frequency (It will display XX hz which is an
indication of the effect frequency – around 45hz is
nice for a 'campfi re').
Rotate either the left knob to adjust the 'Fire' effect
depth threshold (residual glow) (about 35% is nice
for a 'campfi re')
(It will display XX % which is an indication of the
effect depth).
Inside the fi re effect there is a switchable parameter
called 'ColourSwing BLUE' which emulates the
colour transition of fl ames going up the chimney
(i.e. from yellow to blue), to activate this parameter
click the right button ('BLUE' is displayed).
To deactivate 'Colour Swing BLUE' click the right
knob again and 'MONO' (Monochrome) will be
displayed.
(NB: the Fire parameters are stored in non volatile
memory)
The fi re effect can be enhanced with a warm
colour fi lter included within the optional add on
Colour FX Pack (RL-AEOS-CFP) available from your
dealer or www.Rotolight.com ('205' LED CTO is
recommended for best impact, '182' Light Red also
works well, or an Amber, CT Straw or other CTO
fi lter).
('Plce') POLICE
PLCE
This effect is an emulation of an emergency services
light – it works best by adding the 712 Bedford Blue,
or '182' Light Red Filter Gel included within the
optional Add On Colour FX Pack.
Click the right switch to activate the Police effect
Rotate either the left or right knob to adjust the
Police beacon speed
18