Rotolight AEOS User Manual page 25

('TEMP') TEMPERATURE
T E M P
Click the left switch to display the internal operating
Temperature of AEOS. NB: if AEOS detects the
battery temperature rising to 58 degrees or above,
it will display 'Too Hot' (touch any knob to clear
message) and automatically cut the output down
to 25% to prevent overheating.
(Please use only quality battery systems with AEOS,
such as the Rotolight LionHeart 95mWh V-Lock,
which will drive the light at full continuous power
for up to 3 hours).
Click the left switch to return to MENU, alternatively
you can return to the basic operation (BRI / COL) by
pressing both control switches together.
('VERS') FIRMWARE VERSION
VERS
Click the left switch to display the fi rmware version
installed in your AEOS.
(NB: The fi rmware can be updated if required by
your Rotolight Distributor via the update port on
the back of AEOS)
Click the left switch to return to MENU, alternatively
you can return to the basic operation (BRI / COL) by
pressing both control switches together.
('DEMO') DEMO MODE
D E M O
(Use this to let AEOS automatically demonstrate a
selection of its unique capabilities, mainly useful for
retail stores).
Set a desired brightness and base colour
temperature using 'BRI / COL'.
Enter MENU then navigate to 'DEMO' by rotating
the left knob.
Select 'DEMO' by clicking the right knob.
AEOS will now demonstrate a range of effects from
its library, whilst simultaneously explaining what is
being demoed on the red display.
Click the left switch to return to MENU, alternatively
you can return to the basic operation (BRI / COL) by
pressing both control switches together.
25