Led And Beeper Indications - Datalogic Touch TD1100 series Quick Reference Manual

LED and Beeper Indications

LED and Beeper Indications
The reader's beeper sounds and its LED illuminates to indicate various functions or errors on
the reader. A "Green Spot" also lights to indicate a good read. The tables below list these
indications. One exception to the behaviors listed in the tables is that the reader's functions
are programmable, and may or may not be turned on. For example, certain indications, such
as the power-up beep can be disabled using programming bar code labels. Reference the
PRG for a more detailed list.
Indication
Power-up
Good Read
ROM Failure
Limited Scanning Label
Read
Reader Disabled
14
LED
LED flashes/blinks on power-up,
however, this may be too rapid to
view. With a USB interface, the LED
blinks until enumeration with the
host is completed.
LED behavior for this indication is
configurable using the PRG.
200ms on / 200ms off
N/A
The LED blinks continuously 100mS
on / 900 mS off
Beeper
Reader beeps four times at high-
est frequency and volume upon
power-up.
One beep at current frequency,
volume, mono/bi-tonal setting
and duration upon a successful
label scan.
Reader sounds one error beep at
highest volume for 200 mS.
Reader ' c hirps' six times at the
highest frequency and current
volume.
N/A
Touch TD1100