Removing The System Board - Compaq Presario 1900 XL1 Maintenance & Service Manual

Removal & Replacement Section
Compaq logo: Link to
Compaq.com home page
Models: XL1, XL160, XL161, XL162, XL163, and XL165
Before You Begin
Removal Sequence
Product Description
(Illustration not shown but is forthcoming.)
1.800.AT.COMPAQ
privacy statement
legal notices
file:///C|/download/www.compaq.com/athome/support/msgs/1900XL/4sysbd2.html6/27/2004 11:46:56 AM
Maintenance & Service Guide
Presario 1900 Series
Specifications
Troubleshooting
Pin Assignments
United States
STORE | PRODUCTS |
SERVICES | SUPPORT |
CONTACT US | SEARCH
Parts Catalog
Battery Operations

Removing the System Board

(Continued)
13. Remove the right hinge bracket
before
removing the DC IN board.
14. Disconnect cable from DC IN
board.
15. Lift the RJ11 connector off the
guide posts
located on the right side on the
chassis.
Return to Removal and Replacement
Procedures.
June 27, 2004
Index