Connecting Icube Ii To Your Computer; Wireless Connection Setup - Phonak iCube II User Manual

5. Connecting iCube II to your
computer
iCube II is shipped with a USB adapter that
is pre-paired and will ensure a quick and easy
set-up of the wireless connection with your
fitting PC.
Alternatively, iCube II can also be connected with any
Bluetooth capable PC. It may also be connected via USB
cable if it is not allowed to use a wireless connection.

5.1 Wireless connection setup

Automatic connection
To connect iCube II with the fitting PC make sure that
Phonak Target 4.0 or a higher version is installed.
Plug the USB adapter in a free USB port on your fitting
PC. Switch iCube II on and the connection will be
established automatically.
The USB adapter is pre-paired with iCube II. After
replacement of either the adapter or iCube II,
a manual pairing is required as described below.
11