Checking The Rear Wheel Drive Hub; Installing The Rear Wheel - Yamaha XVS1100AWR Service Manual

REAR WHEEL AND BRAKE DISC
EAS00567

CHECKING THE REAR WHEEL DRIVE HUB

1. Check:
S rear wheel drive hub
Cracks/damage ! Replace.
S rear wheel drive hub dampers
Damage/wear ! Replace.
EAS00572

INSTALLING THE REAR WHEEL

1. Lubricate:
S drive shaft splines
2. Lubricate:
S wheel axle
S wheel bearings
S oil seal lips
3. Install:
S rear wheel assembly
a. Install the rear wheel assembly 1 with the
rear brake caliper bracket 2 and hold the
bracket to keep the specified position.
b. After installation of the rear axle shaft 3 ,
slide the wheel assembly to forward direc-
tion.
c. To make sure the caliper bracket mounts on
the swingarm and then, fix the holder of swin-
garm temporally.
NOTE:
The holder should installed with the punch mark
a facing upper.
d. Tighten the rear gear housing bolts, with spe-
cified tightening torque.
e. Tighten the nut of rear axle shaft with speci-
fied torque.
–28–
CHAS
Recommended lubricant
Molybdenum disulfide grease
Recommended lubricant
Lithium soap base grease
Rear gear housing bolt
70 Nm (7.0 mSkg, 51 ftSlb)
Wheel axle nut
107 Nm (10.7 mSkg, 77 ftSlb)