Table of Contents
Advertisement
Rectifire/ regulator and light (re-
36
duce relay) lead
CABLE ROUTING
A Clamp the battery positive (+)
lead to the battery with battery
band.
B Connect the battery negative (–)
lead and push it in to the space
between battery box and battery.
C Push the wireharness into the
space between frame and start-
er motor relay.
–9–
SPEC
D Route the harness and starter
motor (+) lead, that are con-
nected to the rectifier regulator
and other equipment, by the out-
side of the frame side bracket
and then secure it by passing the
band through the weight saving
hole of the bracket. (The secur-
ing point should be within 0 to 10
mm (0 to 0.39 in) right above the
junction point of harness side
leads that are connected with the
battery (–) lead.)
Hide quick links:
Advertisement
Table of Contents
