Ii-5-3 Voice Vlan; Ii-5-3-1 Properties - Draytek VigorSwitch P1280 User Manual

PVID
Accepted Type
Ingress Filtering
Tagged VLAN
Untagged VLAN
Forbidden VLAN
Apply
I I - 5 - 3 V o
I I - 5 - 3 V o
With such feature, a VLAN will be created temporarily and when the specified OUI device
delivers protocol packets related to "VoIP", VigorSwitch will guide these packets into the
specified Voice LAN with specified priorioty tag to speed up the packet transmission. Such
voice VLAN is only active inside VigorSwitch for packet transmission. After these packets
leave VigorSwitch, the Voice VLAN tag will be removed immediately.
I I - 5 - 3 - 1 P
I I - 5 - 3 - 1 P
This page allows a user to configure global and per interface setting of voice VLAN.
VigorSwitch P1280 User's Guide
802.1Qspecification.
Access – Accepts only untagged frames and join an untagged
VLAN.
Trunk - An untagged member of one VLAN at most, and is a
tagged member of zero or more VLANs.
A PVID (Port VLAN ID) is a tag that adds to incoming untagged
frames received on a port so that the frames are forwarded to
the VLAN group that the tag defines.
For port under Access Mode, VLAN ID provided as PVID would
automatically be selected as the untagged VLAN.
Specify the acceptable-frame-type of the specified interfaces.
It's only available with Hybrid mode.
All - Accept frames regardless it's tagged with 802.1q or not.
Tag Only - Accept frames only with 802.1q tagged.
Untag Only - Accept frames untagged.
Enable the ingress filtering to filter out any packets not belong
to any VLAN members of this port. It is enabled automatically
while operating in Access and Trunk mode.
Enabled – Click it to enable the function.
Disabled - Click it to disable the function.
Specify the VLAN profile tagged in the VLAN.
Specify the VLAN profile untagged in the VLAN.
Specify the VLAN profile forbidden in the VLAN.
Save the settings or changes to the switch.
i c e V L A N
i c e V L A N
r o p e r t i e s
r o p e r t i e s
33