Ii-1-2 Ipv6 Address - Draytek VigorSwitch P1280 User Manual

Gateway
DNS Server 1
DNS Server 2
Apply
I I - 1 - 2 I P
I I - 1 - 2 I P
Use the IPv6 Address screen to configure the switch IPv6 address and the default gateway
device. The gateway field specifies the IPv6 address of the gateway (next hop) for outgoing
traffic.
Available settings are explained as follows:
Item
Auto Configuration
IPv6 Address
Link Local Address
Gateway
VigorSwitch P1280 User's Guide
notation for example 255.255.255.0. If static mode is enabled,
enter subnet mask in this field.
It is available when Static is selected as Mode.
Enter the IP address of the gateway in dotted decimal
notation. If static mode is enabled, enter gateway address in
this field.
It is available when Static is selected as Mode.
If static mode is enabled, enter primary DNS server address in
this field.
It is available when Static is selected as Mode.
If static mode is enabled, enter secondary DNS server address
in this field.
Save the settings or changes to the switch.
v 6 A d d r e s s
v 6 A d d r e s s
Description
Enable - Check it to let switch automatically configure IPv6
address.
It is available when Auto Configuration is Disable.
Enter the IPv6 address of your switch. If auto configuration
mode is disabled, enter IPv6 address in this field.
It is available when Auto Configuration is Disable.
Type
It is available when Auto Configuration is Disable.
Enter the IPv6 address of the router as your default IPv6
21