Digital Communications Commands Continued - Fluke 7012 User Manual

Digital Communications Commands continued

Command Description
Set serial sampling setting to n
seconds
Set serial duplex mode:
Set serial duplex mode to full
Set serial duplex mode to half
Set serial linefeed mode:
Set serial linefeed mode to on
Set serial linefeed mode to off
Calibration Menu
Read low set-point limit value
Set low set-point limit to n
Read high set-point limit value
Set high set-point limit to n
Miscellaneous (not on menus)
Read firmware version number
Read structure of all commands
Read Heater
Set Heater
Set heater to low
Set heater to high
Read Refrigeration
Set Refrigeration
Set Refrigeration to on
Set Refrigeration to off
Read Expansion Valve 1
Set Expansion Valve 1
Set Expansion Valve 1 to on
Set Expansion Valve 1 to off
Read Cooling Power
Set Back Pressure
Set back pressure on
Set back pressure off
Legend:
Note:
Command Command
Format Example
sa[mple]=n sa=0
du[plex]=f[ull]/h[alf]
du[plex]=f[ull] du=f
du[plex]=h[alf] du=h
lf[eed]=on/of[f]
lf[eed]=on lf=on
lf[eed]=of[f] lf=of
*tl[ow] *tl
*tl[ow]=n *tl=-80
*th[igh] *th
*th[igh]=n *th=205
*ver[sion] *ver
h[elp] h
f1 f1
f1=1/0
f1= n
f1=0
f1= n f1=1
f2 f2
f2=1/0
f2= n f2=1
f2= n f2=0
f3 f3
f3=1/0
f3= n f3=1
f3= n
f3=0
f4 f4
f4=1/0
f4= n f4=1
f4= n f4=0
[] Optional Command data
{} Returns either information
n Numeric data supplied by user
9 Numeric data returned to user
x Character data returned to user
When DUPLEX is set to FULL and a command is sent to READ, the command is returned followed by a
carriage return and linefeed. Then the value is returned as indicated in the RETURNED column.
10 Digital Communication Interface
Returned
Returned Example
tl: 999 tl: –80
th: 999 th: 205
ver.9999,9.99 ver.2100,3.56
list of commands
f1:9 f1:1
f2:9 f2:0
f3:9 f3:1
f4:9 f4:1
Interface Commands
Acceptable
Values
0 to 4000
FULL or HALF
ON or OFF
–999.9 to 999.9
–999.9 to 999.9
0 or 1
0 or 1
0 or 1
0 or 1
55