Figure 5 Drain Location And Lid Options - Fluke 7012 User Manual

Figure 5 Drain Location and Lid Options

1) The top half of the latch attaches the lid to the bath. There are two
latches; one on the front and one on the back.
2) The thermometer/liquid level is a hole in the lid for filling and removing
of liquid, checking liquid level, and for mounting a thermometer. A hole
may be drilled in the rubber stopper supplied for inserting a thermometer
into the bath.
3) The rectangular access hole, on the standard lid, may be used to insert
the users device to be thermostatted. To obtain specified control levels
this hole must be covered to prevent thermal disturbance to the bath.
Covers may be purchased separately from Hart Scientific.
3) The circulation inlet - outlet on the pump lid is the access area or the in-
let and outlet for the circulation pump.
7 Parts and Controls
Bath Tank and Lid
25