Usb Com Port Emulation - Honeywell 2020 User Manual

Cordless base accessory

Hide thumbs Also See for 2020:

Table of Contents

USB Com Port Emulation

Scan the following code to program the image scanner to emulate a regular RS-

232-based Com Port. If you are using a Microsoft® Windows® PC, you will need

to download a driver from the Honeywell website (www.honeywell.com/aidc).

The driver will use the next available Com Port number. Apple® Macintosh

computers recognize the image scanner as a USB CDC class device and

automatically uses a class driver. Scanning the code below changes the

terminal ID to 130.

USB COM Port Emulation

Note: No extra configuration (e.g., baud rate) is necessary.

CTS/RTS Emulation

CTS/RTS Emulation On

* CTS/RTS Emulation Off

ACK/NAK Mode

ACK/NAK Mode On

* ACK/NAK Mode Off

2 - 6

2020 User's Guide

Table of Contents