Vehicle Settings - Mercedes-Benz COMAND Operating Instructions Manual

Vehicle settings

46
Your COMAND equipment
These operating instructions describe all
standard and optional equipment available
for your COMAND system at the time of pur-
chase. Country-specific differences are pos-
sible. Please note that your COMAND system
may not be equipped with all the features
described. This also applies to safety-relevant
systems and functions. Therefore, the equip-
ment on your COMAND system may differ
from that in the descriptions and illustrations.
Should you have any questions concerning
equipment and operation, please consult an
authorized Mercedes-Benz Center.
Important safety notes
G WARNING
If you operate mobile communication equip-
ment while driving, you will be distracted from
traffic conditions. You could also lose control
of the vehicle. There is a risk of an accident.
Only operate this equipment when the vehicle
is stationary.
You must observe the legal requirements for
the country in which you are currently driving
when operating mobile communications
equipment in the vehicle.
Vehicle settings
Calling up vehicle settings
Press the Ø button on the COMAND
X
control panel.
or
Press Vehicle Vehicle
X
The vehicle menu is displayed.
in the main function bar.
To select Vehicle Settings Vehicle
X
press the controller.
To select the desired vehicle setting: turn
X
and press the controller.
The main area with the setting element is
active.
Selecting a different vehicle setting:
To activate the menu for selecting the vehi-
X
cle setting: slide 5 the controller.
Exiting the vehicle settings:
To select &: slide 6 and press the con-
X
troller.
Ambient lighting
General notes
You can set the following for the ambient
lighting:
Interior welcome light
R
Ambient lighting is activated for a short
time when the driver's door is opened.
Brightness
R
This setting makes an additional change to
the brightness of the ambient lighting.
Color
R
This setting changes the color of the ambi-
ent lighting.
Setting the brightness
Call up Vehicle Settings Vehicle Settings
X
To select Ambient Light: Ambient Light: Brightness
X
turn and press the controller.
The setting element is active.
Press the controller.
X
To change the brightness value: turn and
X
press the controller.
You can find further information on the inte-
rior lighting in the vehicle Operator's Manual.
Settings: turn and
( page 46).
Y
Brightness: