Editing - Mercedes-Benz COMAND Operating Instructions Manual

Editing intermediate destinations
You can perform the following functions:
change intermediate destinations
R
switch the sequence of the intermediate
R
destinations in the intermediate destina-
tions menu
delete intermediate destinations
R
To select an intermediate destination in the
X
intermediate destinations menu: turn and
press the controller.
A menu appears.
To change an intermediate destination:
X
select Edit Edit in the menu.
Change the address, e.g. the city and
X
street.
To select OK: turn and press the controller. OK
X
The intermediate destinations menu
appears and displays the changed inter-
mediate destination.
You can change the sequence of the inter-
mediate destinations entered and the desti-
nation. To change the sequence, at least one
intermediate destination and the destination
must have been entered.
To change the order: in the menu, select
X
Move. Move
Turn the controller and move the intermedi-
X
ate destination or destination to the
desired position.
Press the controller.
X
To delete an intermediate destination:
X
select Delete Delete in the menu.
Destination entry
Accepting intermediate destinations
for the route
To select Start Start in the intermediate desti-
X
nations menu: press the controller.
The route is calculated with the entered
intermediate destinations.
If Calculate Alternative Routes Calculate Alternative Routes
enabled in the basic settings, the menu
item Continue Continue is displayed instead of
Start Start( page 56).
Y
If an intermediate destination was passed
during route guidance, a green tick mark
will be entered in the intermediate destina-
tions menu. Once the route has been recal-
culated, the intermediate destination is
deleted from the intermediate destinations
menu.
Saving as a personal route
Insert the SD memory card (
X
To select Save Save As As Personal
X
intermediate destinations menu: turn and
press the controller.
The route is saved on the SD memory card
under Personal Personal Routes Routes.
Searching for a gas station when the
fuel level is low
Requirement: the setting
must be enabled ( page 58).
Y
If the fuel tank reserve level is displayed, you
will see the Gas Gas on on Reserve Reserve Do Do you
to start a search for surrounding to start a search for surrounding
gas stations? gas stations? message.
To select Yes Yes or No: turn and press the con- No
X
troller.
If you select Yes Yes, the gas station search
starts. When the search is complete, a list
of the gas stations available along the route
or in the vicinity is displayed.
is
page 175).
Y
Personal Route Route in the
Gas on Reserve Gas on Reserve
you want want
Z
71