Vehicle Functions; Your Multimedia System Equipment; Important Safety Notes; Vehicle Settings - Mercedes-Benz COMAND Supplement Manual

Vehicle settings

42

Your multimedia system equipment

These operating instructions describe all the
standard and optional equipment of your multi-
media system, as available at the time of going
to press. Country-specific differences are pos-
sible. Bear in mind that your vehicle may not
feature all functions described here. This also
applies to safety-relevant systems and func-
tions.
Read the information on qualified specialist
workshops in the vehicle Operator's Manual.

Important safety notes

G
WARNING
If you operate mobile communication equip-
ment when driving, you may be distracted
from the traffic situation. You could also lose
control of the vehicle. There is a risk of an
accident.
Only operate this equipment when the vehicle
is stationary.
You must observe the legal requirements for the
country in which you are currently driving when
operating mobile communications equipment in
the vehicle.
Vehicle settings
Calling up vehicle settings
Press Vehicle Vehicle in the main function bar.
X
The vehicle menu is displayed.
To select Vehicle Vehicle Settings
X
troller.
The Vehicle Settings Vehicle Settings
To select the desired vehicle setting: turn and
X
press the controller.
The main area with the setting element is
active.
Selecting a different vehicle setting:
To activate the menu for selecting the vehicle
X
setting: slide 5 the controller.
Exiting the vehicle settings:
To select &: slide 6 and press the con-
X
troller.
Settings: press the con-
menu is active.
Setting the easy entry and exit feature
This function makes getting in and out of your
vehicle easier.
Call up Vehicle Settings Vehicle Settings
X
To select Easy Entry/Exit Easy Entry/Exit: turn and press
X
the controller.
The setting element is active.
To change the setting: press the controller.
X
You can find further information on the easy
entry and exit feature in the vehicle Operator's
Manual.
Activating/deactivating the acoustic
locking verification signal
You can also set an audible signal to confirm
that the vehicle has been locked.
Call up Vehicle Settings Vehicle Settings
X
To select Acoustic Lock Acoustic Lock Feedback
X
and press the controller.
The function switches on or off, depending on
the previous setting.
You can find further information on the locking
feature in the vehicle Operator's Manual.
Switching the seat belt adjustment
on/off
The Belt Belt Adjustment Adjustment function adjusts the driv-
er's and front-passenger seat belt to the upper
body of the vehicle occupants.
Call up Vehicle Settings Vehicle Settings
X
To select Belt Belt Adjustment Adjustment: turn and press
X
the controller.
The function switches on or off, depending on
the previous setting.
You can find further information on seat belt
adjustment in the vehicle Operator's Manual.
Switching the automatic mirror fold-
ing function on/off
When the Automatic Mirror Folding Automatic Mirror Folding
tion is activated, the outside mirrors fold in auto-
matically as soon as you lock the vehicle from
the outside. The outside mirrors fold out auto-
matically again as soon as you unlock the vehi-
cle.
( page 42).
Y
( page 42).
Y
Feedback: turn
( page 42).
Y
func-