DES-7200 Series Quick Installation Guide
Installing the Power Supply
The DES-7210/7206 system provides AC and DC power, which can be installed in the same
way by performing the following steps:
1.
Remove any blank panel of the power module by loosening the two cross screws with a
cross screwdriver, as shown in Figure 3-3 and 3-4.
2.
Insert the power supply module into the cabinet along the guide rail, as shown in Figure
3-5 and Figure 3-6:
Installing the Power Supply of the DES-7210 and DES-7206
Installing the Power Supply of the DES-7210 and DES-7206
9