Advertisement
Master View Menu "S" – Computer Extender List.
Shows all computers in the system and their group
assignment and status. Also here a name can be given
via the Info menu, the group assignment is done by
entering the numbers 1 to 8.
Master View Menu "H" – Multi-Head Configuration
If you use multiple monitors per computer each graphic
channel and each monitor requires individual Extender
boxes that have to be grouped in the Extender OSD
menu via multi head configuration. To simplify the
mapping individual names should be assigned to the
console and computer boxes. To assist in the name
assignment, the LED on each Extender box is flashing
red/green if it is just configured. It may be helpful to
connect all Extender boxes to a switch locally in one
place to configure the network. In this case you only need
one console to configure all Extender boxes.
Open the multi-head configuration menu and create a
new MULTI-HEAD SET for each computer and for each
console by pressing the A button. In the submenu multi-
head detail, you can configure the individual multi-head
configuration settings by selecting the corresponding
boxes. The type is detected automatically after
establishing the first connection.
To leave this menu and save settings press the Q.
The details menu can always be brought up by pressing I in the main Multi-Head menu. By pressing R you
can remove an extender from the Multi-Head set.
Multi-Head Set connections are always switched together in combination.
This product is subject to continuous technological development.
7
The OSD and the functionality may differ slightly from the one described here
Advertisement
