Bosch T4200 14-2D Installation And User Instructions Manual page 4

Key to symbols and safety instructions
Maintenance
▶ The user must maintain and
periodically service the appliance.
▶ The user is responsible for the safety
and environmental compatibility of
the installation.
▶ The appliance should be serviced
annually.
▶ Only original spare parts should be
used.
Explosive and inflammable materials
▶ Inflammable materials (paper,
solvents, ink, etc.) should not be
stored near the appliance.
Combustion air and ambient air
▶ To avoid corrosion, combustion air
and ambient air should be free of
aggressive substances (for example
halogenated hydrocarbons
containing chlorine and fluoride
composites).
Important information for the user
▶ This appliance may only be installed
by a registered LP Gas installer.
▶ All registered installers are issued
with a card carrying their registration
number.
▶ Ask to be shown the card before
allowing the installation work to
commence and make a note of the
Installer QCC number. Upon
completion of the installation, the
installer is required to explain the
operational details of the appliance
4
together with the safety instructions.
You will be asked to sign acceptance
of the installation and be provided
with a completion certificate. You
should only sign for acceptance of the
installation when the installation is
completed to your satisfaction.Note
that your invoice is required in the
event that you wish make a guarantee
claim.
Important information for the
installer
▶ This appliance may only be installed
by a LP gas installer registered with
the Liquefied Petroleum Gas
Association of Southern Africa.
▶ The appliance must be installed in
accordance with the requirements of
SANS 10087-1 and any fire
department regulations and/or local
by laws applicable to the area. If in
doubt check with the relevant
authority before undertaking the
installation.
▶ Upon completion of the installation
you are required to fully explain and
demonstrate to the user the
operational details and safety
practices applicable to the appliance
and the installation.
Client information
▶ Inform the client about the function
and operation of the appliance.
▶ Caution clients against performing
modifications or repairs themselves.
Therm 4200 – 6 720 821 605 (2017/08)