Table of Contents
Advertisement
TRANSPORTATION AND CHANGING OF
PART - 5.
INSTALLATION POSITION
Transportation and Changing of Installation Position
• Original package and foam may be kept for re-transportation (optionally).
• You should fasten your fridge with thick package,
bands or strong cords and follow the instructions for
transportation on the package for re-transportation.
• Remove movable parts (shelves, accessories, veg-
etable bins etc.) or fix them into the fridge against
shocks using bands during re-positioning and trans-
portation.
Carry your fridge in the upright position.
Repositioning the Door
• It is not possible to change the opening direction of your fridge door, if the door handles
on your fridge are installed from the front surface of the door.
• It is possible to change the opening direction of the door on models without any handles.
• If the door opening direction of your fridge may be changed, you should contact the
nearest Authorized Service to have the opening direction changed.
PART - 6.
BEFORE CALLING YOUR AFTER SALES SERVICE
In case you observe anything abnormal with your equipment, you may try to solve the prob-
lem in accordance with the following explanations. If your equipment still does not operate
normally, contact with the Customer Contacts. You may have access to the list of authorized
services and contact info at the website.
What to do if your refrigerator does not operate;
Check that;
• There is no power ,
• The general switch in your home is disconnected ,
• The thermostat setting is on "1" position ,
• The socket is not sufficient. To check this, plug in another appliance that you know which
is working into the same socket.
What to do if your refrigerator performs poorly;
Check that;
• You have not overloaded the appliance ,
• The doors are closed perfectly ,
• There is no dust on the condenser ,
• There is enough place at the rear and side walls.
If your fridge is operating too loudly;
Normal Noises
EN -23-
Hide quick links:
Advertisement
Table of Contents
