Fan Speed; Sleep Mode - DAEWOO ELECTRONICS DWC-084R Service Manual

Fan Speed

(1) Motor speed (high speed, low speed).
(2) Remote controller setting fan speed. (H, L)
(3) Relation of operating mode between fan speed.
FAN ONLY
H
L

Sleep Mode

(1) When you are going to sleep, select sleep button in remocon and the unit controls the room to the desired
temperature. (The unit will not operate after 4 hour)
(2) For changing the temperature.
• Mode I (L1)
• The unit will not operate after 4 hour.
• Mode II (L2)
• The unit will not operate perfectly after 10 hour.
(3) To cancel sleep mode, press the SLEEP button again or press the MODE button once. : the SLEEP indicator will
disappear in the display.
3min. Time Delay of Compressor
In normal operation, there is a time delay of three minutes between turn off and turning back on including
initial power up.
COOL
H H
L L
Difference
desired temperature
between room
temperature (°C)
Temperature
SET ON
SET OFF
TURBO
H
-
1°C 0.5°C
0.5°C
1°C
Desired
0 0.5
SET TIME
Desired Temperature
+1˚C
2hr 2hr 2hr 2hr
8
1°C 0.5°C
1.0 HOUR
+1˚C
2hr